Thinklogical Router Interfaces Manual do Utilizador descarregar pdf (Página 9)

17600 – System Data

System data consists of 8 bytes (12 for the HX80). The first byte has the current alarm

contact settings. Each bit corresponds to a contact. Bit 0 (lsb) is the bit for the Power

Supply 1 alarm, and bit 7 (msb) is the bit for the 'any' alarm. The next two bytes are for the

installed card inventory. A '0' bit means the card is installed and a '1' bit means the card is

removed. The other bytes are for internal use.

The HX80 has 4 additional bytes at the end for sync card status.

17601:17616 – Card Data

Each I/O card in the router has an associated TCP port. Card 1 uses port 17601, card 2 uses

17602, and so on. The data is formatted as follows:

• 6 bytes, internal use

• 1 byte, card type

◦ 0xff missing

◦ 0x00 upstream

◦ 0x01 downstream (only the VX40 has downstream cards)

• SFP data, 256 bytes per SFP, 5 SFPs per card

◦ 128 bytes, SFP ID data

◦ 128 bytes, SFP diagnostic data

Nov 3, 2014 Router Interfaces: VX40 / VX80 / HX80 9/25

Table 1: VX40/VX80/HX80 System Data

Alarms Inventory

Byte Byte Byte

Bit 0 1 2

0 Alarm 1 Card 1 Card 9

1 Alarm 2 Card 2 Card 10

2 Alarm 3 Card 3 Card 11

3 Alarm 4 Card 4 Card 12

4 Alarm 5 Card 5 Card 13

5 Alarm 6 Card 6 Card 14

6 Alarm 7 Card 7 Card 15

7 Alarm 8 Card 8 Card 16

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 24 25

Sem comentários

Thinklogical Router Interfaces Manual do Utilizador Página 9