Thinklogical Secure Console Server Manual Manual do Utilizador descarregar pdf (Página 21)

S e c u r e C o n s o l e S e r v e r M a n u a l , R e v . K

, J u l y , 2 0 1 3

Page 21

3.2.4 Connect Your Console

The console port is used for local access to the SCS. Connect your terminal or computer to

the console port with a terminal emulation package. The SCS’s console port has a DCE

configuration with adjustable parameters.

The default communication parameters for the console port are:

•

••

• 9600 baud

•

••

• 8 data bits

•

••

• No parity

•

••

• 1 stop bit

•

••

• Xon/Xoff flow control

Use a conventional CAT5 cable to connect your terminal or computer to the CONSOLE

jack (RJ45) on the rear of the chassis.

prompt will appear. Log

in as root

Press Enter to continue.

The password:

prompt comes up next. Enter root

(the default root password) and

press Enter.

3.2.4.1 SCS-R and Sentinel 32 Dual Console Interface

The SCS80R / SCS160R / SCS320R / SCS480R / Sentinel 32 have dual Console Ports, with

Console Port 1 pinned as DCE and Console Port 2 pinned as DTE. Console Port 2 is

disabled in the default configuration. To use the second console port, the sysadmin must

enable it.

Console Port 2 is activated by editing the file /etc/inittab

Refer to Section 6 for other

System Commands.

3.2.5 Connect to the Ports

Any system (e.g., server, router, switch) with a serial port may be connected to the SCS

for consolidated system administration. Server Ports are individually configurable. Consult

your server documentation as needed.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 89 90

Comentários a estes Manuais

Sem comentários

Thinklogical Secure Console Server Manual Manual do Utilizador Página 21

Comentários a estes Manuais