Thinklogical Secure Console Server Manual Manual do Utilizador descarregar pdf (Página 72)

S e c u r e C o n s o l e S e r v e r M a n u a l , R e v . K

, J u l y , 2 0 1 3

Page 72

Command: $MB

Online BPS Speed

Values:

= speed in bits per second

Default: 28,800

Description: $MB75 Selects CCITT V.23 mode

$MB300 Selects 300 bps on-line

$MB1200 Selects 1200 bps on-line

$MB2400 Selects 2400 bps on-line

$MB4800 Selects 4800 bps on-line

$MB9600 Selects 9600 bps on-line

$MB14400 Selects 14400 bps on-line

$MB19200 Selects 19200 bps on-line

$MB28800 Selects 28800 bps on-line

$MB33600 Selects 33600 bps on-line

Command: $RP

Ring Priority vs. AT Command Priority

Values:

= 0 or 1

Default: 1

Description: $RP0 The AT command will have priority over the ring. S1 will be reset to 0 if

an AT command is received. This command is storable to memory.

$RP1 The ring will have priority over the AT command. S1 will increment even if an AT command and

ring are received together and the incoming call will be answered when S1 is equal to S0. Note:

SocketModems do not detect ring cadence of TelTone telephone line simulators as a valid ring.

Command: $SB

Serial Port Baud Rate

Values:

speed in bits per second

Default: 115200

Description: $SB300 Sets serial port to 300 bps

$SB1 200 Sets serial port to 1200 bps

$SB2400 Sets serial port to 2400 bps

$SB4800 Sets serial port to 4800 bps

$SB9600 Sets serial port to 9600 bps

$SB1 9200 Sets serial port to 19200 bps

$SB38400 Sets serial port to 38400 bps

$SB57600 Sets serial port to 57600 bps

$SB1 15200 Sets serial port to 115200 bps

$SB230400 Sets serial port to 230400 bps

Command: +VDR=x, y Distinctive Ring Report

Values: x = 0, 1 Distinctive Ring report control. See description.

y = 0–255 Minimum ring interval in 100 ms units. See description.

Default: 0, 0

Description: Enables reporting of ring cadence information to the DTE and specifies the minimum ring

cadence that will be reported.

The report format is one line per silence period and one line per ring period. The length of the

silence period is in the form DROF=number in units of 100 ms<CR><LF>, and the length of the ring is in

the form DRON=number in units of 100 ms<CR> <LF>. The modem may produce a Ring event

code after the DRON message if enabled by the y parameter. The y parameter must be set to

a value equal to or smaller than the expected ring cadence in order to pass the report to the DTE.

+VDR=0, n/a Disables Distinctive Ring cadence reporting.

+VDR=1, 0 Enables Distinctive Ring cadence reporting. Other call progress result codes

(including RING) are reported as normal.

+VDR=1, >0 Enables Distinctive Ring cadence reporting. The RING result code is reported

after the falling edge of the ring pulse (i.e., after the DRON report).

+VDR=? Displays the allowed values.

+VDR? Displays the current value.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 89 90

Comentários a estes Manuais

Sem comentários

Thinklogical Secure Console Server Manual Manual do Utilizador Página 72

Comentários a estes Manuais